Polyjacking in Columbia, MD | Foam Concrete Leveling

The clean way to raise concrete

Foam lifts the slab, not your budget

Polyjacking is what we reach for first on most Columbia jobs, and the reasons stack up quickly. We drill a line of holes barely wider than a pencil and inject a two-part polyurethane foam that expands under the slab, filling every pocket of empty space as it grows and lifting the concrete back to level in small controlled steps. The foam sets in minutes. A driveway or garage floor we lift with foam in the morning is ready for the car that same afternoon. And because the cured foam is light and waterproof, it does not bear down on the weak soil that let the slab settle in the first place, and rain will not wash it out later.

Get a Free Quote

Polyurethane foam injection equipment used for concrete lifting in Ellicott City, MD

Why homeowners pick foam

What polyurethane concrete lifting gives you

■

Pencil-sized holes

Foam ports are far smaller than the holes mudjacking needs, so there is less to patch and less to see afterward.

■

Cured in minutes

Full strength comes almost immediately. Park on the driveway or walk the sidewalk the same day, no waiting around.

■

Light on weak soil

Foam adds almost no weight, so it will not overload the same soft ground that let the slab settle to begin with.

■

Waterproof and stable

Polyurethane does not absorb water or break down, so a foam lift holds up to Maryland rain and freeze-thaw.

■

Works in winter

Foam cures in colder weather than a cement slurry, so a trip hazard does not have to wait for spring.

■

Fills the voids too

The same foam seals the empty pockets under the slab, so water has nowhere to collect and wash the base out again.

Foam or mudjacking?

Polyjacking vs mudjacking, in plain terms

Both methods push material into the gap under a sunken slab; what differs is the material. Mudjacking sends down a heavy cement slurry through larger holes, and on a big thick slab the cheaper slurry can win on price. Polyjacking sends expanding foam through small holes, cures far faster, and adds almost no weight to soft ground. For the aging residential driveways, walks, and garage floors we see across Columbia and Ellicott City, foam usually comes out ahead, and if it is a close call we will quote you both.

What neither method fixes is concrete that is already broken. If the slab is cracked clean through or the surface is flaking apart, lifting it only delays a pour you will pay for anyway, and we will say so rather than sell you a lift. We do field the occasional call from outside Maryland on these pages, so if you landed here from North Jersey, an Edison concrete contractor can quote the replacement in that market.

Compare mudjacking

Filling a soil void under a concrete slab in Ellicott City, MD

Polyjacking FAQs

Quick answers

Polyjacking goes by a few names, foam jacking and polyurethane concrete lifting among them, and it raises a sunken slab by injecting expanding foam underneath. We drill pencil-sized holes, pump in the two-part foam, and it grows to fill the empty space and float the concrete back up to level. Within a few minutes it has set hard.

For most Columbia homes, yes. The foam weighs a small fraction of what a cement slurry does, so it is not pressing down on soil that already gave out once. The holes are smaller. The cure is minutes instead of a day. It never washes out. Mudjacking still wins on price for very large, heavy slabs, and when that is your situation we will say so instead of upselling foam.

Yes, and winter is actually where foam shows off. Polyurethane cures at lower temperatures than a mudjacking slurry, so foam work keeps going through the Maryland cold months while mudjacking waits on warmer ground. A slab that is a trip hazard in January does not have to stay one until spring.

Barely. The ports are about the size of a dime, we patch them with a color-matched compound, and from standing height on a driveway most people cannot find them afterward.

Thinking foam for your slab?

Call, or send over a couple of photos of the slab. We will tell you whether polyjacking is the right fix and what it would cost.

Call (410) 673-4898 Get a Free Quote